>

Enter Your Email To Sign Up
For Our E-Newsletter:


> Drive Shafts

Spicer 1310 to 1350 Conversion U-joint
Our Price: $34.99

Forged Cross
Lubeable
Outside Snap Ring
Cup Size A= 1.062in.
Outside To Outside A= 3.2190in.
Cup Size B= 1.062in.
Outside To Outside B=3.625in.
Dana Spicer U-Joints are one of the most trusted U-Joints in the high performance market place. Dana Spicer has been manufacturing U-Joints for well over 50 years and has been a trusted manufacture for many heavy duty and light duty truck builders. Dana Spicer uses only premium materials machined to the highest quality standards in the industry.
Rockwell 1500 Series Used Yoke
Our Price: $34.99

1500 series will fit 2.5 tone flange bolt holes
will need a 1500 series U-joint
Designed for a 5 ton drive shaft but can be used for a 2.5 ton application.
1350-1410 U-Joint
Our Price: $44.99

Conversion U-Joint 1350-1410




MFG/SERIES:SPICER 1350 / SPICER 1410
A1 LOCK UP:3.622
A2 LOCK UP:4.187
B1 BEARING CAP DIAMETER:1.188
B2 BEARING CAP DIAMETER:1.188
BEARING TYPE:ROUND-OSR
CONVERSION:2-0053 to 2-0054
LUBE FITTING:No Lube Fitting
Rockwell 2.5 Ton Drive Shaft U-joints
Our Price: $44.99

U-Joint for Rockwell 2.5 ton axle shafts
Rockwell 2.5 Ton 1410 Yoke
Our Price: $49.99
Call for Availability

Good quality 1410 Yoke for Rockwell 2.5 ton.
Rockwell 2.5 Ton Pinion Yoke
Our Price: $75.00

Rockwell 2.5 Ton Pinion Yoke
1500 Series Rockwell U-Joint
Our Price: $89.99

Deigned for a 5 ton shaft but can be used for a 2.5 ton application with a 1500 series yoke. (kk-rwuy1500)
Dimensions are 4 3/4" x 4 3/4"
Rockwell 2.5 Ton 1410 Drive Shaft
Our Price: $149.99

Front or rear rockwell 2.5 ton drive shafts. These drive shafts are great condition they are factory pull-off. They use the 1410 U-joint
NP205 1410 Flange for Rockwell Axle driveshaft
NP205 1410 Flange for Rockwell Axles with After Market Seal
Our Price: $169.99

NP205 32 Spline Yoke Flange. This will allow the military deuce and half drive shaft to bolt up to a NP205 transfer-case. Allowing the user the ability to save on custom drive shafts.  Flange takes After Market seal included in kit, stock seal will not work.
Rockwell 2.5 ton Used Drive Shaft
Our Price: $169.99

Rockwell 2.5 ton used drive shaft
Can be used for a 2.5 ton application with a 1500 series yoke (kk-rwuy1500) and
1500 series u-joint (kk-rwuj1500)
Dimensions collapsed end to end 48", extended end to end 51"
This drive shaft is equivalent to a 1480 U-joint
Popular with Big Mud Trucks

Copyright ©  Kryptonite Kustoms LLC. All Rights Reserved. Built with Volusion