Apparel and DVD's
Brackets and Tabs
Brakes and Controls
Heim Joints/Rod Ends
Soft and Hard Tops
Towing and Recovery
Enter Your Email To Sign Up
For Our E-Newsletter:
4 Link Bracket
Wishpot add this item to your
This is our Large Link Mounting Cross-member. It is designed for mount control arms to the center of the rig.The features of the Large Link Mounting Cross-member are as follows:
CNC cut and formed from 1/4" A50 Plate Steel
Ships un-painted and un-welded
We suggests having it welded by a qualified welder
Total of (6) pieces that snap together with slots and tabs
Formed across the back and designed to be welded to 1.75" tube
Bolt holes are 9/16" but can be drilled out to 1"
Distance between mounting holes is 2.625 for 1" rod ends running high misalignment spacers or Large Flex Joints.
Cut outs in top and bottom allow for easy clean out of debris
The bracket is setup for mounting your control arms at 22.5 degrees per side.
This bracket is huge measuring over 18" wide and when put together is 3" tall...
Price includes one complete bracket system for a total of (6) unwelded/unfinished pieces. No hardware is included. Rod Ends and/or Large Flex Joints, nuts, bolts and misalignment spacers that may be in picture are for reference only and does not come with this purchase.
07+ Jeep JK Antirock® Rear Sway Bar Kit
Jeep JK Front Sway Bar Quick Disconnect Kit
Upper 1.25" Heim Frame Mount
Jeep JK 3'' Lift Kit by Daystar
Jeep JK Transmission Skid Plate
Jeep JK Steel Braided Extended Brake Lines
Jeep CJ Full Width Axle Conversion Kit
Jeep JK Front D30/44 Inner C Gusset Kit
Share your knowledge of this product.
Be the first to write a review »
Shipping and Returns
Terms and Conditions
Mon-Fri 8am-5pm CST